Table of Contents
One of the most common problems is Wi-Fi Connection Failure issue. People always complain about how slow Wi-Fi is and how they get error messages like “Limited access,” “Unidentified Network,” or “No internet access.” If your device is having trouble connecting to the internet, Windows 11 has a feature that can reset Wi-Fi and Ethernet network adapters to fix the most common problems, like slow Wi-Fi speeds on Surface and other computers.
The reset feature will get rid of all the current settings and put back the factory networking settings. It will also reinstall all the drivers for the network adapter. You can’t choose which Ethernet or Wi-Fi adapter to use. All of the adapters will be taken off and put back on by this feature.
After you finish the process, you may need to reinstall or reconfigure other networking software, such as VPN client software. We mentioned below are the ways to Fix ‘Wi-Fi Connection Failure’ Issue. If you know more further information regarding this error, visit Microsoft support center.
Ways To Fix ‘Wi-Fi Connection Failure’ Issue
On PC
Check your network adapter SSID
Check to see if your wireless network adapter’s SSID is available and what its status is. If “Not Connected” shows up on your Network Adapter, click “Connect.” You may need to debug your wireless network settings if you can’t connect to your network (an advanced, technical troubleshooting issue). Or, it may say “Getting Network Address” or “Authenticating” instead. If that happens, you might need to click “Diagnose” to fix a problem with your IP address.
Reboot your modem
Your internet service provider (ISP) will tell you to unplug your modem and then plug it back in. This is similar to what your IT person will tell you to do when you first get a new desktop computer. If that doesn’t work, unplug your router, wait a minute, and then plug it back in. Sometimes, resetting your network by restarting your modem or router makes the problem go away.
Reset Wi-Fi network adapter
To fix connection problems caused by Wi-Fi or any other network adapter, you need to close all open programmes and follow these steps:
- Start Windows 11 and go to Settings.
- Select Network and Internet.
- Click the tab on the right that says “Advanced network settings.”
- Click the Network Reset tab at the bottom of the page, which is found under “More settings.“
- To fix Wi-Fi problems on Windows 11, click the “Reset now” button.
- Click “Yes” to make sure.
- Click the button labelled Close.
- Restart your computer.
Check for Windows Updates
Microsoft is always putting out updates that fix bugs and other problems you might run into while using your computer. If you are using an older version of Windows, you might not get the updates that make your computer run better.
- To get the most recent version of Windows, press the Windows key + I to open the Settings menu. Then, go to Windows Updates and click on “Check for updates.”
- Windows will look for updates and install them on its own if it finds any. Try to connect to the network once the process is done.
On Smartphone
Use a Scan QR Code in the case of a Router
The best way to fix a broken Wi-Fi connection on an Android device is to scan the QR code, which doesn’t need a password. But you’ll have to do it every time you want to use Wi-Fi because it’s the quickest way to fix a phone’s Wi-Fi connection. Every router has a QR code, and the code is always written in black on a white seal. Please follow these steps to find your scanner:
- Go to your phone’s Settings menu.
- Select Network and Internet.
- Click on the wifi icon on the top right. You will see a box with a line through it.
- When you click on the box with a line through it, your camera will appear.
- Put the camera on the QR code and wait for it to be read. Once it’s done, it will connect right away, but your Android Wi-Fi must be on.
Check and Reset your Android Phone wifi Connection
If you’ve ever wondered how to fix a broken Wi-Fi connection on Android, the easiest way is to reset your Wi-Fi connection. If your phone says it can’t connect to the internet even though you have Wi-Fi, there are many things that could be wrong. For example, you might not have your Wi-Fi set to turn on automatically or have your mobile network data turned off. The solution is to check your settings and reset them. Here’s how it works:
- Go to your phone’s Settings menu.
- Select Network and Internet.
- Use the wifi.
- Click on Wi-Fi settings.
- Make sure these three things are the same: automatically turn on Wi-Fi, Open the network alert, and have it automatically switch to mobile data.
Reconnect to the Wi-Fi
Many of the people who use my Wi-Fi always have trouble connecting, and sometimes they can’t connect at all. “My phone won’t connect to Wi-Fi authentication problem” can be fixed by disconnecting and then reconnecting. All you have to do is turn off the Wi-Fi connection on your Android and search again. Once your phone finds the Wi-Fi, connect with the right password and check to see if the connection is now good. Here are the steps to help you understand:
- Go to your phone’s Settings menu.
- Select Network and Internet.
- Tap the icon next to the Wi-Fi and wait for the connection to be made.
Do an Admin Check on the Router or the other Phone Wi-Fi
This is only possible if you own the router and know how to do a small amount of technical admin work without making things worse. But if an organization or cybercafé owns it, ask them to check if the router or the other phone you’re connected to are working properly. There could have been a change in the password, a broken cable, or a bad connection. It is the job of the admin to check to see if everything is okay with the router.
FAQ
How do I fix Wi-Fi connection failure?
Open the Settings app and tap Network & Internet or Connections. These options may be different for your device. Turn off Wi-Fi and turn on mobile data to see if that makes a difference. If it doesn’t, turn off mobile data and turn on Wi-Fi, then try again.
What causes Wi-Fi connection failure?
There could have been a change in the password, a broken cable, or a bad connection. It is the job of the admin to check to see if everything is okay with the router.