The Best Gateway for Tech Trends

Copyright 2023 @compsmag - All Right Reserved
Blogs

How to Download Windows 11 ISO File and Install From USB

by Tech Desk
by Tech Desk

This tip is about the how to Download Windows 11 ISO File and Install From USB. So read this free guide, How to Download Windows 11 ISO File and Install From USB step by step. If you have query related to same article you may contact us.

How to Download Windows 11 ISO File and Install From USB – Guide

To successfully create a Windows 11 USB bootable drive, you will need a Windows 11 ISO file, also known as an ISO image. As such, it’s a good idea to get this sorted out before moving on to the three ways to create a Windows 11 USB stick. Here it is. how to Download the Windows 11 ISO to your PC.

  • Visit Microsoft’s official page to download Windows 11.
  • Scroll down to the Download Windows 11 Disk Image (ISO) section.
  • Click on the drop-down menu and select Windows 11.
  • Then click Download button Continue.
  • The current page will load additional information and show the Select Product Language section. Click the drop-down list to Choose one and select your preferred language. Then click Confirm to continue.
  • When the download section loads, click the 64-bit Download button button.
  • Your download will begin immediately. However, it may take some time to complete the download, depending on your Internet speed.

    • After downloading the ISO file, follow one of the methods below to create a bootable Windows 11 USB drive.

    How to Create a Bootable Windows 11 USB with Rufus

    Rufus is an open source utility to format and create a bootable USB flash drive for Windows OS. Follow these steps to create a Windows 11 USB drive using Rufus.

  • Visit the Rufus website and scroll down to the Download section.
  • Click the Rufus link to download the latest version.
  • Run the executable file and click Yes if prompted by UAC.
  • Connect your USB flash drive to your PC and wait for Rufus to detect it and show it in the Device section.
  • Click the drop-down menu for Boot Selection and select Disk or ISO Image.
  • Then click on the SELECT button button.
  • Select the Windows ISO file and click Open.
  • Click the drop-down menu on the Image option and select Windows 11 Standard Installation (TPM 2.0 + Safe Boot).
  • Alternatively, select Windows 11 Extended Installation (No TPM / No Secure Boot) to create a bootable drive for an unsupported system. This will ignore the system requirement during installation.
  • Leave the partition scheme (GPT) and target system (UEFI) as the default.
  • Under Volume Label, enter a name for your USB flash drive.
  • Leave the file system and cluster size and other options as default.
  • Make sure the Quick Format and Create Extended Label and Icon Files option is checked.
  • Click on the Start button button to start the bootable drive creation process.

    • Once done, Rufus will show a success message. After that, you can use Windows 11 bootable drive to install the OS on a supported system.

    The Media Creation Tool is Microsoft’s in-house solution for creating installation media. Follow these steps to create a bootable USB or DVD drive using the Media Creation Tool:

  • Connect your at least 8GB USB flash drive to your PC. Check that it is detected and that you have backed up all the files on your USB drive.
  • Then visit the Microsoft Download Center page.
  • In the Create Windows 11 Installation Media section, click the Download Now button button and save the file on your PC.
  • Then run the MediacreationtoolW11.exe file and click Yes if prompted by UAC. The tool may take a few seconds to start, so wait until you see the setup wizard.
  • Click on the Accept button button to agree to the terms.
  • The Media Creation Tools will automatically select the Edition and Language. To change the language, uncheck the Use recommended options for this PC box.
  • Choose your options and click Next.
  • In the Choose which media to use window, select USB Flash Drive.
  • Click Next button.
  • Select your USB drive from the list of available drives.
  • Click Next button Continue.
  • Then click on the Finish button button.
  • The media creation tool will now download the necessary Windows 11 files and create an installation media. This might take a while, so feel free to grab a coffee in the meantime.

    • When the message Your USB flash drive is ready appears, click the Finish button button to close the setup wizard. You can now boot from the USB drive to troubleshoot or do a clean install of Windows 11.

    How to Create a bootable drive using the command prompt

    If you don’t want to use a third-party tool to create a bootable drive, you can use the Diskpart utility and command prompt to create the installation media. Here it is how to Knife.

  • First, backup all files on your USB drive and connect it to your PC.
  • Press the Win key, type cmd and click Run as administrator at the command prompt. You can also use PowerShell if you prefer Command Prompt.
  • In the command prompt window, type the following command and press Enter to start the Windows Diskpart utility.

    • DISC PART

  • Then type the following command to list all available storage devices: LIST DISK
  • Here, locate your USB drive. You can look at the Size column to determine your USB drive. In this case, the USB drive is listed as Disk 2.
  • Then type the following command to select your drive:
  • In the above command, change DISK 2 with the number assigned to your USB drive. For example, if you have a single SSD or SATA drive configuration, your main drive will show as DISK 0 and the USB drive as DISK 1. It is extremely important that you select the correct drive as the next step involves cleaning the selected unit.
  • Then type the following command and press enter to erase the entire contents of the drive: Clear
  • Then type the following command to create a primary partition: Create Partition Primary
  • Then type the following command to select the primary partition:

    • List Pair

  • The command prompt will show your USB drive details.
  • Type the following command and press enter to activate the partition:

    • Active

    disk part

  • Then type the following command to show the available volume. list volume
  • This will help you determine the drive letter for the mounted ISO file. In the Type column, the mounted ISO will be listed as DVD-ROM. And the Ltr column lists the letter associated with the volume.
  • Once you have the volume details for the ISO mounted, type the following command to exit Diskpart: Exit

    • Final note

    I hope you like the guide How to Download Windows 11 ISO File and Install From USB. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.

    You Might Be Interested In
    Related Articles
    Blogs DailyComputer GuidesComputers Tips and TutorialsguiderobertGuides and Tutorialsguiding12How To GuideHow To Guidesinternet tips and tutorialsTipsTricksWindows 11Windows Tips
    Tech Desk

    Our editorial team manages this account. We provide Quality technical hacks and guides, Consumer Electronics comparisons, How-To tips, and tutorials with the latest updates.

    Leave a Comment

    * By using this form you agree with the storage and handling of your data by this website.

    You may also like

    How to Fix Keyboard Auto-Typing on Windows 11

    How to Fix “Error Code 0x80070422” issue in Windows 11/10

    How to Fix “0x8096002A No error description available” issue in Windows

    How to Fix “Call of Duty Vanguard Dev Error 6032” issue on...

    How to Fix Cash App Session Error Domain 503

    How to Fix Error Code 0x80070002 in Windows 11/10

    Where technology meets possibility" "Compsmag has Proudly Shared Free Information Since 2014.

    This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More