Table of Contents
This article will show you how to Fix ‘WSL Error 4294967295’ issue on Windows. You may have seen the error code 4294967295 when you tried to open Windows Subsystem for Linux (WSL) in a Windows terminal or use Windows Explorer to access your Linux files. If you see this error code, it means that Windows and Linux were not able to talk to each other properly. This can stop you from using WSL properly. Users have been getting the error code 4294967295 when they try to start their Windows Subsystem for Linux. That error message makes it sound like the connection failed because Windows, which was the host, didn’t respond.
The “Attempt to access invalid address” error code usually shows up when you try to browse your Linux distribution using Windows File Explorer and it fails to connect to the distribution for no reason. The “An error occurred mounting one of your file systems” error message shows that Windows Subsystem for Linux is not always easy to use. For example, you can now install WSL with just one command. However, there are still some problems with the platform that can make using it a bit difficult. Anyway, this article will show you how to Fix ‘WSL Error 4294967295’ issue on Windows, we just talked about, so just keep reading.
What is WSL error 4294967295?
When people try to start Windows Subsystem for Linux, some have reported getting the error code 4294967295. The message that shows up on the screen says. A number of users have said that they see the error code when they use Windows File Explorer to look through the Linux distribution. This problem happens when you can’t get to the distribution.
It’s mostly a network issue that can be fixed with a number of different methods. That being said, let’s first take a moment to talk about what this error means. In essence, the error message means that the WSL2 instance stopped running without warning. Windows uses the “4294967295” exit code as a general error code when a process ends without giving a reason.
What causes of WSL error 4294967295 issue?
- Corrupted Installation: If your WSL installation is corrupted or incomplete, you may encounter this error. Reinstalling WSL can sometimes resolve the issue.
- Outdated Windows Subsystem for Linux: Using an outdated version of WSL may result in compatibility issues and errors. Ensure that you have the latest version installed.
- Incompatible System Files: Sometimes, system files required for WSL may be missing or corrupted. Running the “sfc /scannow” command in Command Prompt as an administrator can help repair these files.
- Windows Updates: Missing critical Windows updates can cause issues with WSL. Ensure that your Windows OS is up to date with the latest updates and patches.
- Conflicting Software: Certain third-party software or security applications can interfere with WSL operations. Try disabling or temporarily uninstalling such software to see if it resolves the issue.
- Disk Space: Insufficient disk space on your system drive (usually C:) can lead to errors in WSL. Make sure you have enough free space on your system drive.
How to Fix ‘WSL Error 4294967295’ issue on Windows
Restart WSL
- Start up the Task Manager and right-click on any process that has to do with WSL.
- Click End task or Turn off.
- After that, run your favorite terminal emulator as an administrator.
- For example, to open Run in Command Prompt, press the Windows key and R at the same time. Then, type cmd into the text field.
- This will open the Command Prompt as an administrator. Press the Ctrl, Shift, and Enter keys at the same time.
- It will ask you to confirm your action, so click “Yes.”
- In the next window, type “wsl” and click “Run as administrator” to open WSL again. Now you can see if the issue has been fixed.
- You can also use the steps below to re-enable WSL instead:
- Run each of the following commands one at a time in the elevated Command Prompt window:
- DISM = “online /disable-feature virtualmachineplatform”; run “norestart”;
- No need to restart after running DISM /online /disable-feature /featurename:Microsoft-Windows-Subsystem-Linux.
- After you’re done with the commands, restart your computer and run the following commands in cmd:
- You can use DISM to enable a feature called VirtualMachinePlatform and not start it again.
- Microsoft-Windows-Subsystem-Linux DISM /online /enable-feature /norestart
Reset Network Settings
- In the Windows search box, type “cmd” and then click on “Run as administrator.”
- It will ask you to confirm your choice, so click “Yes.”
- Now, run each of these commands one at a time:
- wsl –turn off
- netsh iso reset winsock
- netsh reset all int ip
- restart proxy with netsh winhttp
- run ipconfig /flushdns
- To open the Settings app, press the Windows key and the letter I at the same time.
- Go to Status > Network reset in Network & Internet. Now click on “Reset.”
- Finally, Restart your computer and see if the problem is fixed.
Check Network Connection
- Error message indicates connection attempt failed or an established connection was interrupted due to the connected host (in this case, Windows) not responding.
- The first thing to do is ensure a stable internet connection. This is very important because issues like network interruptions, latency, or packet loss can make it hard for the client and server to communicate, potentially causing the problem in question.
Modify the Hypervisor Launch Type
- Start up the Command Prompt as an administrator.
- Run the following command:
- bcdedit /set start type for hypervisor auto
- After that, turn your computer back on and see if the problem is fixed.
- If you think there is a problem with the Hyper-V service, you can also try starting it up again. To do that, just open the Services window, find the Hyper-V service, and right-click on it. Click “Restart” to see if it changes anything.
Conclusion
The error code 4294967295 might show up when you try to start Windows Subsystem for Linux with a command. This post gives you a few possible solutions to this problem to help you figure it out. You are welcome to try. It’s common to get the message “process exited with code 4294967295” when you try to start Windows Subsystem for Linux (WSL) in a Windows terminal. It might also show up when you use Windows Explorer to look through your Linux distribution. If you want to know more information about this issue so you can visit Microsoft Official Website.
Questions and Answers
Right-click and choose “Run as administrator” to open PowerShell or the Windows Command Prompt as an administrator. Type the wsl –install command, and then restart your computer. Running WSL and installing the Ubuntu Linux distribution will be possible after running this command.
Start up. Right-click the first result that comes up and choose “Run as administrator.” This will open the Command Prompt or PowerShell. Here’s another way to write the command: wsl -l -v
When you turn on WSL Windows, the binaries that work with WSL can be found at C:\Windows\System32\lxss. You won’t have to worry about this folder very often, but it can be useful sometimes.