Table of Contents
This guide is about Fix ‘Windows Update error 0x80070057’ Issue. So read this free guide, Fix ‘Windows Update error 0x80070057’ Issue step by step. If you have query related to same article you may contact us.
Fix ‘Windows Update error 0x80070057’ Issue – Guide
Error 0x80070057 indicates that Windows updates have failed and there are several reasons why the error can occur. These can be damaged Windows update components, previous updates that failed and caused the corruption of the system files needed to zip and unzip the update packages and their applications. 0x80070057 number is the hexadecimal error number and is common in Windows Vista, 7, 8 and 10.
The error is usually followed by a long message that says: “There were some problems installing the updates, but we’ll try again later. If you still see this and want to search the web for information or contact support, this might help – (0x80070057)”. This error can also lead to a slightly different message, for example B. “Something went wrong”
Fix Windows Update Error 0x80070057
free space on drive
Error 0x80070057 often shows up along with Windows Update as the update files can be huge. Also, when Windows performs a system-wide update, it stores the old version in a folder called Windows.old, which it can take with you up many gigabytes of storage space; more than you may have available. This is usually when Windows Update fails. But it’s not the only time this error can show up.
To see how much space is left on the system drive, press Win + E to start File Explorer and Stop This PC. If it looks like it might be tight, right click on the drive, select Properties > Disk Cleanup > System Files.
Check everything that can go, especially the Recycle Bin and Windows Update Cleanup, click OK and confirm with Delete Files. If you prefer to keep Windows Update files for recovery, you can skip the System Files step and start from Disk Cleanup.
Synchronize Windows date and time
When the Windows clock is out of sync it can cause all kinds of problems including error code 0x80070057. While this is not a common cause, it tends to be easy to fix.
First, check the time and date by clicking on the time at the far right of the Windows taskbar. If it feels right, we can skip this step, but if it’s not aligned with the actual time and date, right-click on the taskbar and select Adjust date / time. We recommend enabling the following options:
With those settings, click Sync Now, just to be sure. If you find that your Windows time is always out of sync, there may be a deeper problem.
Run Chkdsk
Chkdsk is the easiest way to find and fix corrupt files. This Windows tool scans your entire hard drive and can also identify faulty hardware. To run Chkdsk, press Win + E to start File Explorer, go to This PC, right-click on the system drive and select Properties.
From here, switch to the Tools tab, click Scan, then click Scan Drive. Scanning will take place in the background. If a problem is found, you can choose what to do with it. We recommend fixing them and restarting the system.
Run DISM command
If the manual replacement described above is too difficult or if there are too many files to replace, we can use the DISM command.
DISM stands for Deployment Image & Serving Management, and we can use this command to try to download and restore system file integrity. At an elevated command prompt or Windows PowerShell prompt, type the following command:
DISM / Online / Cleanup-Image / RestoreHealth Depending on the integrity of the system and the level of corruption present, this command may take a while to complete. It is known that this process seems to stop at 20%.
If that happens, wait a minute, it should continue on its own. Once you’re done, check to see if any files have been replaced. If so, you will need to restart your computer and then run the sfc /scannow command again. It should replace the corrupted file this time.
Fix Group Policy Interference
This wasn’t the case for everyone, but when Windows 10 was released, many users (understandably) lashed out at the archaic Windows Update system measured by Microsoft.
Windows 10 Home users were largely tied to this system, but Windows 10 Pro users had the option to change their Group Policy settings to make the update system impotent. However, interfering with this policy may be exactly what is causing the issue with the Windows Update process.
Press Win + R to open the Run dialog. Type gpedit.msc and press Enter. Now follow this path Computer Configuration > Administrative Templates > Windows Components > Windows Update > Configure Automatic Updates > Not Configured. Restart the system and hopefully the update will complete.
Reset Windows Update repository
Occasionally, we may reset the Windows Update repository in an attempt to alleviate the issue. This is a rather time-consuming process that I won’t go into in detail in this article.
However, I will point out the Microsoft Support document that details the entire process so you can try this fix with their information.
Windows Update Troubleshooter
I’m not sure how well the Windows Update Troubleshooter works for this error as it can be directly affected by group policies and other system settings. But if you still haven’t been able to complete an update, it might be worth a download and a try. Go to this page and download Windows Update Troubleshooter. After downloading, run the troubleshooter.
Select Windows Update, then select Advanced, then Run as administrator. This will run the troubleshooter as an administrator and will be able to find and resolve a wider variety of issues. Press Next.
The troubleshooter will automatically scan the system for issues affecting Windows Update. If any issues are found, the troubleshooter will attempt to automatically fix them unless you uncheck the autofix box.
Perform a Windows system restore, reset or format your drive
This is pretty much your last resort as you will either lose your changes since the last system restore point was made or you will have to set up your system from scratch after a reboot or formatting of your drive. But it will fix any Windows-based or software issues. This article about how to restoring Windows 10 to factory settings shows all your options, from the least to the most invasive. Remember to make backups before destroying your system.
Check Windows Update
If error code 0x80070057 is displayed up independent of Windows Update, a missing update could be the cause. To check if you have any pending updates, press Win + I, go to Update & Security and click Check for Updates. Install any pending updates and try again.
Final note
I hope you like the guide Fix ‘Windows Update error 0x80070057’ Issue. In case if you have any query regards this article you may ask us. Also, please share your love by sharing this article with your friends.