How to Fix “BIOS ID Check Error” issue in Windows 11/10

How to Fix “BIOS ID Check Error” issue in Windows 11/10: When you tried to start up your Windows 11 or 10 computer, have you ever seen the feared “BIOS ID Check Error”? You might get stuck at the startup screen with this annoying mistake and not be able to get into your system. Don’t worry, though! You can fix this problem and get your machine back up and running in a number of ways.

This article will talk about a number of ways to fix the “BIOS ID Check Error” in Windows 11/10, from basic repair steps to more complex fixes. You can be sure to try the fix that fits your level of technical knowledge because we’ll break each one down in an easy-to-understand way. This complete guide will give you the information and tools you need to fix this error and get back to using your computer normally, no matter how tech-savvy you are or how new you are to it.

Let’s head straight for the “BIOS ID Check Error” and fix it! Remember that the most important thing is to troubleshoot in a planned way, starting with the simplest answers and moving on to more complicated ones if needed. You’ll be up and running again in no time if you bear with it and follow the right ways how to Fix “BIOS ID Check Error” issue in Windows 11/10.

What is “BIOS ID Check Error” issue in Windows 11/10

In Windows 11 and 10, the “BIOS ID Check Error” usually means that there is a problem with your computer’s Basic Input/Output System (BIOS). The BIOS is an important piece of software that sets up hardware during the boot process. If Windows sees a BIOS ID Check Error, it means that the intended BIOS identification doesn’t match up with the current system configuration. This difference could be caused by a broken BIOS, old software, or changes to the hardware.

To fix this problem, start by making sure the BIOS is up to date with the most recent version from the maker. If the issue keeps happening, look for updates or changes to the hardware that could have caused the error. Make sure that the system’s firmware and the operating system that was loaded can work together. If you need specific troubleshooting steps, check the device manufacturer’s support pages or get professional help to fix the BIOS ID Check Error and get the system working properly again.

Causes for “BIOS ID Check Error” issue in Windows 11/10

1. Outdated BIOS Version: The Basic Input/Output System (BIOS) of your computer might not work with Windows 11/10 if it is not up to speed.
2. Corrupted BIOS Settings: The “BIOS ID Check Error” can happen if the BIOS settings are changed or become faulty.
3. Hardware Compatibility Issues: This mistake might happen because some hardware parts aren’t compatible with this version of Windows.
4. BIOS Firmware Corruption: If there is a problem with the BIOS firmware, the machine might fail the ID check when Windows starts up.
5. Malware or Virus: Bad software can mess with the BIOS and make mistakes when the system boots up.

How to Fix “BIOS ID Check Error” issue in Windows 11/10

Remove new hardware

1. Recently added new hardware? Remove it.
2. Check if computer works fine after removal.
3. If yes, possible issues:
   • Incompatibility with your computer.
   • System setting change needed.
   • Defective new hardware.

Unplug any disks or USB devices

1. Remove all disks, CD/DVD from the computer.
2. Disconnect any USB devices (iPods, drives, phones, etc.).
3. Reboot the computer.
4. Check for any changes.

Disconnect external devices

1. Disconnect all devices from the back of the desktop computer, except the power cable.
2. Turn on the computer and see if it beeps normally.
3. If the computer has never beeped, keep the monitor or display connected to see if any change occurs.

Identify beep code

1. Receiving a sequence of beeps?
2. Check motherboard or computer documentation for beep codes.
3. Beep codes help identify failing or bad computer component.
4. If your beep code is not listed, continue troubleshooting.

Check fans

1. Ensure all fans are operational on your computer.
2. If a fan, particularly the CPU heat sink fan, has stopped working, it may lead to overheating or trigger a fan failure detection.
3. This can result in the computer failing to boot and generating a POST code error.

Check cables

1. Verify all cables securely connected to computer, check for loose cables.
2. Ensure disk drives have data cable and power cable connected.
3. Power supply should have at least one cable to motherboard.
4. Some MOBOs may have extra cables for fan power.

Disconnect all expansion cards

1. If the recommendations above do not resolve the irregular POST:
2. Disconnect the riser board (if applicable) and each of the expansion cards.
3. If this fixes the problem or allows the computer to POST, reconnect one card at a time.
4. Determine which card is causing the problem.

Remove RAM

1. Problem persists after removing all hardware.
2. Remove RAM from motherboard and start computer.
3. If different beep code or new beeping, turn off and follow suggestions.
4. Power off before adding/removing memory.
5. Re-insert memory into same slot.
6. If multiple sticks, keep one and rotate through each.
7. Try one stick in each slot.
8. If boots with some memory, likely bad stick, replace.
9. If works in one slot but not another, motherboard likely defective.
10. Use working slot or replace motherboard.

Power cycle the computer

1. Computer power issues can result from problems with the power supply or motherboard.
2. To identify the problem, quickly turn the computer on and off, observing the power light.
3. Successful booting indicates the issue may be resolved.

Check if BIOS chip is loose

1. Check if your motherboard has a BIOS chip.
2. Over time, due to heat expansion, the BIOS chip may become loose.
3. A loose BIOS chip can lead to an irregular POST (Power-On Self-Test) in your computer.
4. Gently press down on the BIOS chip.
5. Ensure the BIOS chip is not loose to maintain proper computer functioning.

Update BIOS

1. Updating BIOS and firmware can resolve system issues.
2. As you can’t boot to the desktop, create a bootable USB on a working machine.
3. Boot the faulty PC with the bootable media.
4. After manually updating the BIOS/firmware, check if the issue is fixed.

Conclusion

Finally, fixing the “BIOS ID Check Error” in Windows 11/10 is very important for keeping the system stable and working properly. Users can easily troubleshoot and fix this problem by following the step-by-step guide given above. Don’t forget to start with simple fixes like updating the BIOS firmware and making sure the gear works with the computer.

If these first steps don’t fix the problem, try more advanced debugging steps, such as clearing the BIOS settings and making sure all the hardware is connected correctly. When making changes to the BIOS, you should always be careful because making the wrong changes can have bad results. To avoid these kinds of mistakes, it’s important to keep the operating system and system drivers up to date.

Question and Answer